Symbol Scanner Ds6707 Manual3/18/2021
The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Motorola.Configurations This guide includes the following digital imager scanner configurations.
![]() Symbol Scanner Ds6707 Code Menu OrWhen using SSI, program the digital imager scanner via bar code menu or SSI host commands. Chapter 7, USB Interface Chapter 8, RS-232 Interface point-of-sale devices, host computers, or other devices with an available RS-232 port. If your problem cannot be solved by Motorola Enterprise Mobility Support, you may need to return your equipment for servicing and will be given specific directions. Whether in hand-held mode or presentation (hands-free) mode in a stand, the digital imager scanner ensures comfort and ease of use for extended periods of time. Unpacking Remove the digital imager scanner from its packing and inspect it for damage. If the scanner was damaged in transit, contact Motorola Enterprise Mobility Support. See It is the approved shipping container; use this to return the equipment for servicing. Configuring the Digital Imager Scanner To configure the digital imager scanner, use the bar codes in this manual, or the 123Scan configuration program. Chapter 4, User Preferences Miscellaneous Digital Imager Scanner Options Preferences for information about programming the digital imager scanner using bar code menus. Standard LED Definitions Table 2-2 No power is applied to the digital imager scanner, or the digital imager scanner is on and ready to scan. The aiming pattern is smaller when the digital imager scanner is closer to the symbol and larger when it is farther from the symbol. Scan symbols with smaller bars or elements (mil size) closer to the digital imager scanner, and those with larger bars or elements (mil size) farther from the digital imager scanner. Insert the digital imager scanner in the Intellistand by placing the front of the digital imager scanner into the stands cup (see Figure Use the Intellistands adjustment knobs to adjust the height and angle of the digital imager scanner. DS6707-SR 6.6 mil PDF417 10 mil QR Code PDF417 (10 mil) 10 mil MicroPDF 7.50 Datamatrix (10 mil) 7.50. Maintenance Cleaning the scan window is the only maintenance required. ![]() Normal when Beep on is enabled and the digital imager scanner is in RS-232 mode. This chapter describes each user preference feature and provides programming bar codes for selecting these features. The digital imager scanner ships with the settings shown in Default Parameters for all host device and miscellaneous defaults). For example, to set the beeper tone to high, scan the High Frequency (beeper tone) bar code listed under issues a fast warble beep and the LED turns green, signifying a successful parameter entry. Scan the appropriate bar code below to reset the scanner to its default settings andor set its current settings as custom defaults. Low Frequency (02h) High Frequency (00h) User Preferences Miscellaneous Digital Imager Scanner Options Disable Parameter Scanning (00h) Medium Frequency (Optimum Setting) (01h).
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |